Heavy Civil & Infrastructure EHS & Safety Management Software

Connect excavation, heavy equipment, critical lifts, temporary works, road and traffic interfaces, tunnel activities, subcontractors, environmental controls, incidents, and corrective actions across major infrastructure projects.

Heavy Civil & Infrastructure projects operate across changing work fronts, large geographic areas, multiple contractors, deep excavations, mobile plant, heavy lifting, major concrete structures, underground utilities, public traffic interfaces, and temporary works. DEXUR EHS connects safety activity to the project, contract package, site section, chainage, work front, contractor, activity, equipment, permit, inspection, incident, corrective action, and field verification involved.

Request an Heavy Civil & Infrastructure EHS Demo  →

Built around Heavy Civil & Infrastructure operations

  • Earthworks & excavation
  • Heavy equipment & critical lifts
  • Roads, bridges & viaducts
  • Tunnels & underground work
  • Temporary works & structures
  • Multiple contractors & work fronts

From work front to verified closure

Heavy Civil & Infrastructure EHS Challenges & DEXUR’s Approach

Heavy Civil projects change continuously as work moves through earthworks, excavation, foundations, utilities, concrete structures, lifting, road construction, tunnel work, testing, commissioning, and handover.

Relevant Heavy Civil risks include deep excavation and trench collapse, underground utility strikes, ground instability, water ingress and dewatering, excavator and worker interaction, dump-truck and mobile-plant movement, reversing and blind spots, crane setup and ground-bearing conditions, critical lifts and rigging, suspended loads, bridge and viaduct work at height, formwork and temporary works, concrete pumping, precast and structural erection, live traffic and work-zone intrusion, tunnel instability and rockfall, ventilation and gas exposure, drilling and blasting where applicable, temporary electrical systems, multiple subcontractors and simultaneous work, and environmental events such as dust, vibration, sediment, fuel spills, and concrete washout.

DEXUR’s Approach

Connect every EHS record to the actual infrastructure work

DEXUR keeps every EHS record connected to the actual infrastructure work front and high-risk activity. An excavation finding remains connected to the excavation permit and chainage, while a critical-lift deviation remains connected to the crane, load, rigging, lift plan, contractor, and work location.

Heavy Civil EHS Workflow: High-Risk Activity Identified → Project / Work Package / Chainage Identified → Contractor & Equipment Identified → JSA / Permit / Required Controls Verified → Pre-Work Field Inspection → Work Authorized → Field Conditions Monitored → Incident / Deviation / Finding Captured → Corrective Action Assigned → Physical Field Correction → Reinspection → Work Resumption / Permit Closure → Effectiveness & Recurrence Monitoring

  • 01

    Identify

    Connect the high-risk activity to the project, work package, chainage and work front.

  • 02

    Contextualize

    Connect the contractor, equipment, permit, JSA and required controls.

  • 03

    Verify

    Complete the pre-work field inspection and authorize the work when controls are verified.

  • 04

    Monitor

    Monitor changing field conditions and capture incidents, deviations and findings.

  • 05

    Correct

    Assign corrective action, complete physical field correction and reinspection.

  • 06

    Verify

    Confirm work resumption or permit closure and monitor effectiveness and recurrence.

One connected platform

Core EHS Capabilities for Heavy Civil & Infrastructure

Connect high-risk infrastructure activities, field controls, incidents, corrective actions and verification without losing the project, work-front, contractor or equipment context.

01 / EXCAVATION

Excavation & Ground-Disturbance Safety

Manage trenches, deep excavations, utilities, ground conditions and protective systems.

  • Track shoring, shielding, sloping, benching, spoil piles, water accumulation, dewatering and safe access/egress.
  • Connect excavation requests to project/chainage, utility verification, ground assessment, geometry, permit approval and pre-entry inspection.
  • Follow daily or changed-condition inspections through finding, corrective action, reinspection and backfill / permit closure.
02 / MOBILE PLANT

Heavy Equipment & Mobile Plant Safety

Manage major civil equipment from mobilization through return to service.

  • Cover excavators, backhoe loaders, bulldozers, wheel loaders, graders, dump trucks, rollers, pavers, piling rigs, drilling rigs, rock breakers, compactors and concrete pumps.
  • Verify equipment ID, pre-use inspection, operator competency, maintenance, brakes/lights/alarms/cameras and safety devices.
  • Review haul routes, pedestrian separation and work authorization, then track defects, near misses, repairs, reinspection and return to service.
03 / LIFTING

Crane, Critical Lift & Rigging Safety

Connect every critical lift to its load, crane configuration, rigging and authorization.

  • Manage bridge beams, precast segments, reinforcement cages, pipes, structural members, formwork systems and major equipment.
  • Verify load weight/dimensions, crane selection, configuration, ground-bearing capacity, lift plan and rigging plan.
  • Track crane and rigging inspections, lifting-team competency, nearby hazards, exclusion zones, authorization, pre-lift briefing, execution and completion verification.
04 / STRUCTURES

Bridge, Viaduct, Concrete & Temporary-Works Safety

Keep concrete, temporary works, equipment and structural release connected.

  • Manage formwork, falsework, shuttering, reinforcement, rebar, concrete pumps, delivery hoses, precast elements, structural erection, elevated work areas, temporary platforms and supports.
  • Verify work package, formwork/temporary-works status, reinforcement/embeds, pump/boom/hose, access and work platforms.
  • Track exclusion zones, pre-pour or pre-erection authorization, condition monitoring, defects, engineering/construction action, post-activity inspection and release.
05 / ROADS

Road Construction & Traffic-Interface Safety

Connect road work, traffic controls and construction-vehicle movement.

  • Manage live traffic, lane closures, diversions, temporary layouts, barriers, delineation, flaggers/banksmen, pavers, rollers, construction traffic, night work and vehicle intrusion.
  • Connect road work to section/chainage, traffic risk assessment and temporary traffic-management plan.
  • Track diversion setup, signs/barriers/delineators, vehicle routes, pre-work inspection, work-zone monitoring, intrusion or near miss, control adjustment and final release.
06 / TUNNELS

Tunnel & Underground Safety

Connect ground, atmosphere, water and emergency readiness to the tunnel section.

  • Manage ground instability, rockfall, ground support, ventilation, gas, dust, water ingress, underground equipment, restricted access, lighting, communication and emergency evacuation.
  • Verify tunnel section/chainage, ground support, ventilation, atmospheric monitoring, water, lighting, communication and equipment inspection.
  • Track authorization, continuous ground/atmosphere/water monitoring, shift handover, deviations/incidents, corrective action, reverification and section release.
07 / BLASTING

Drilling & Blasting Safety

Use where blasting is part of the infrastructure project.

  • Manage blast design, exclusion zones, explosive authorization, communication, post-blast inspection, misfires, flyrock, vibration and ground conditions.
  • Connect blast planning to area assessment, design, authorization and blaster competency.
  • Track warning/communication, pre-blast inspection, execution, post-blast inspection, misfire check, ground/flyrock assessment, area release and documentation.
08 / INCIDENTS & REPORTS

Incident Reporting, Compliance & Reports

Retain project location, work front, contractor, activity, equipment, permit and work-control context.

  • Capture trench collapse, engulfment, utility strike, equipment incidents, dropped loads, crane/rigging failures, formwork and temporary-works failures, traffic intrusion, tunnel events, blasting events and environmental events.
  • Follow Incident / High-Potential Event → Work-Front Control → Activity-Specific Investigation → Root Cause → Corrective Action → Field Verification → Work Resumption Authorization → Cross-Project Learning.
  • Generate excavation, utility-strike, mobile-plant, vehicle-pedestrian, critical-lift, crane/rigging, dropped-load, work-at-height, temporary-works, concrete-pour, traffic, tunnel, blasting, contractor, environmental and repeat high-risk activity reports.

See the patterns behind field activity

Heavy Civil & Infrastructure Risk Visibility & Prioritization

The important question is where high-risk activity controls are weakening, not simply how many incidents occurred. EHS teams should be able to connect findings to the project, chainage, work front, contractor, equipment, permit and field controls.

  • Which active excavations have critical shoring or ground findings?
  • Which excavations repeatedly fail changed-condition checks?
  • Where are utility-strike near misses occurring?
  • Which haul routes have repeated vehicle-pedestrian events?
  • Which excavators or dump trucks have recurring critical defects?
  • Which cranes have repeat setup or inspection findings?
  • Which rigging systems repeatedly fail inspection?
  • Which critical lifts have plan or authorization deviations?
  • Which bridge or viaduct work fronts have unresolved height risks?
  • Which temporary-works systems have critical findings?
  • Which road sections have recurring traffic intrusion?
  • Which tunnel sections repeatedly show ventilation, ground, or water problems?
  • Which subcontractors generate recurring high-risk findings?
  • Which work packages have overdue critical actions?
  • Which supposedly corrected hazards reappear on similar projects?
Heavy Civil Risk Workflow Connected EHS context
Field Finding / Permit Deviation / Incident Project / Chainage / Work Front → High-Risk Activity → Contractor / Equipment
Potential Severity & Exposure Required Permit / JSA / Field Controls Compared
Similar Activity / Work Front Reviewed Repeat Condition Identified
Criticality Prioritized Construction / Equipment / Contractor / EHS Owner Assigned
Field Control Implemented Reinspection → Effectiveness Verified
Recurrence Monitoring Monitor the same risk across projects and similar work fronts.

Measure the follow-through on infrastructure safety

Heavy Civil & Infrastructure EHS KPIs

These KPI families measure excavation, ground disturbance, mobile plant, lifting, traffic, temporary works, tunneling, permits and recurrence rather than relying mainly on generic construction KPIs.

KPI What It Helps You Monitor
Excavation Permit & Changed-Condition Inspection Compliance Whether active excavations have current permits, utility verification, protective-system checks, access verification, daily inspections, and inspections following rain, water, ground, or work-condition changes.
High-Risk Excavation Finding Rate Significant findings involving shoring, shielding, sloping, ground instability, spoil placement, access, water ingress, and underground services.
Utility-Strike & Ground-Disturbance Near-Miss Rate Actual and potential underground-service contact during excavation, trenching, piling, drilling, and other ground-disturbance work.
Vehicle-Pedestrian Interaction Near-Miss Rate Reversing, blind-spot, crossing, haul-route, and work-front interactions involving excavators, dump trucks, loaders, graders, rollers, and other mobile plant.
Critical Mobile-Plant Defect Rate Safety-critical defects on excavators, dump trucks, cranes, piling rigs, drilling rigs, concrete pumps, rollers, pavers, and other major civil equipment.
Critical Lift & Rigging Finding Rate Deviations involving crane setup, ground-bearing conditions, lift plans, rigging configuration, sling condition, exclusion zones, and lifting-team competency.
Dropped-Load & Suspended-Load Near-Miss Rate Near misses involving bridge beams, precast units, pipes, reinforcement cages, structural elements, formwork systems, and other lifted loads.
Work-Zone Traffic Intrusion Rate Public or construction vehicles entering protected road-construction zones or breaching temporary traffic-management controls.
Temporary-Works & Formwork Critical Finding Rate Significant findings involving formwork, falsework, temporary supports, working platforms, structural stability, and release conditions.
Tunnel Ground / Ventilation / Water-Ingress Finding Rate For tunnel projects, significant ground-support, rockfall, ventilation, atmospheric, water-ingress, and underground-work findings.
Critical High-Risk Permit Deviation Rate Control deviations during excavation, critical lifting, work-at-height, tunneling, blasting, electrical isolation, or other high-risk permitted work.
Repeat High-Risk Activity Finding Rate Whether corrected excavation, lifting, mobile-plant, traffic, tunnel, temporary-works, or ground-disturbance hazards recur.

Review these indicators alongside incident trends by project, equipment, contractor and work front to identify persistent issues and prioritize deeper investigation.

Every work front. One connected view.

Visibility by Heavy Civil Role & Project Location

Heavy Civil EHS visibility should follow the project/work-front hierarchy, so every record can be traced from enterprise context to field verification.

Corporate EHS

Project comparisons, high-potential events, critical excavations, mobile-plant risk, lifting findings, contractor performance, and repeat hazards.

Project EHS

Active excavations, critical lifts, active permits, equipment defects, traffic-management issues, temporary works, tunnel conditions, environmental events, and overdue field actions.

Project Managers

High-risk work status, critical findings by work package, contractor performance, permit constraints, and critical actions affecting execution.

Site Safety Managers

Daily excavation inspections, mobile-plant findings, lifting activity, traffic-control status, tunnel/underground conditions, and field actions.

Equipment Managers

Equipment inspections, operator competency, defects, maintenance, equipment incidents, and return-to-service verification.

Construction Supervisors

Active work front, crew, equipment, JSA/JHA, permits, immediate findings, and work-resumption status.

Contractor Managers

Work packages, competencies, induction, permits, inspections, incidents, corrective actions, and repeat contractor findings.

Organization

  • Enterprise
  • Region
  • Project
  • Contract / Work Package

Location & Work

  • Site / Section / Chainage
  • Work Front
  • Contractor / Subcontractor
  • High-Risk Activity
  • Equipment / Plant

Follow-Through

  • Permit / JSA / Inspection
  • Incident / Finding
  • Corrective Action
  • Field Verification

Unified EHS management for Heavy Civil & Infrastructure

Why Heavy Civil & Infrastructure Projects Need One Connected EHS Platform

High-risk infrastructure events should remain connected to the project and field context that explains what happened, what changed, and whether the control was verified before work resumed.

Utility-Strike Traceability

Keep a utility-strike near miss connected to the excavation permit, chainage, service locate, excavator, operator, subcontractor, investigation, action, and field reinspection.

Critical-Lift Traceability

Keep a critical-lift deviation connected to the load, crane configuration, ground condition, rigging equipment, lift plan, contractor, and authorization.

Mobile-Plant Context

Keep a mobile-plant near miss connected to the haul route, equipment, operator, pedestrian controls, and corrective change.

Temporary-Works Verification

Keep a formwork finding connected to the structure, temporary-works design/status, corrective work, reinspection, and release.

Traffic-Interface Control

Keep a work-zone intrusion connected to the road section, traffic-management plan, barriers, signs, flagger positions, and corrective control.

Tunnel Restart Control

Keep a tunnel ventilation finding connected to the tunnel section, work activity, atmospheric results, ventilation condition, corrective control, and authorization to resume work.